Konica Minolta bizhub PRESS C8000e - Manual (Page 613)

bizhub PRESS C8000/e 12-39
12.8 [Network] Tab 12
6
To delete the setting, click [Delete].
7
Click [OK].
Clicking [Cancel] will cancel the deletion.
8
Click [OK] on the setting complete page.
IPsec SA Setting
1
Enter the desired period of time into the "Lifetime After Establishing SA" text box. Available range is
from 120 to 604800 seconds.
2
Make the desired selection from the drop-down lists of Security Protocol, ESP Encryption Algorithm,
and Authentication Algorithm. For details of each item, see Section 10.
Peer
1
To specify Perfect Forward Secrecy, IP Address, Pre-Shared Key Text, or Encapsulation Mode, click
[Edit].
If the setting has already been made, an asterisk (*) is displayed in the "Set" field for each.
2
Make a setting for each item.
For details of each item, see Section 10.
3
Click [OK].
Click [Cancel] to cancel the setting and clear the specified information.
4
To delete the setting, click [Delete].
5
Click [OK].
Clicking [Cancel] will cancel the deletion.
6
Click [OK].
Click [Cancel] to cancel the setting and clear the specified information.
7
Click [OK] on the setting complete page.