Konica Minolta bizhub PRESS C8000e - Manual (Page 188)

5.4 Curl Adjustment (Relay Unit RU-508) 5
bizhub PRESS C8000/e 5-48
5.4 Curl Adjustment (Relay Unit RU-508)
Curl Adjustment is performed by Relay Unit RU-508.
You can perform curl adjustment using the following two methods:
- Mechanical method: Decurl section strokes the paper to reduce curl. Select one of five curl correction
strength levels.
- Humidification method: Use the decurl unit of Humidifier HM-101 to humidify the paper and adjust the
amount of moisture contained in the paper after printing to reduce curl.
You set these adjustments for each tray.
NOTICE
The curl adjustment can not only be made for a tray but be registered with a profile name as one of the paper
conditions, so that you can also make the curl adjustment for the tray by recalling the paper conditions linked
to that profile name.
d
Reference
See page 10-24 for how to register paper conditions with a profile name.
0 The mechanical curl adjustment is effective for coated and colored paper types.
0 Both mechanical and the humidification curl adjustments are effective for plain and fine paper types.
0 The humidification curl adjustment for plain and fine paper types is set to [ON] by default. A service en-
gineer is allowed to change the default setting to [OFF]. Contact your service representative, if desired.
In this case, pressing [Reset] on the Curl Adjustment Screen in Paper Setting also resumes [OFF] for
the humidification curl adjustment for plain and fine paper types.
0 In addition to the decurl unit of the Relay Unit RU-508, the other feeding parts also help to reduce curl
by cooling paper after printing.
1
Press the [MACHINE] tab to display the Machine Screen.
2
Press [Curl Adjustment].
The Curl Adjustment Screen will be displayed.