Konica Minolta bizhub PRESS C8000e - Manual (Page 231)

bizhub PRESS C8000/e 6-15
6.5 Disposing Punch Waste 6
6.5 Disposing Punch Waste
The following options have a puncher installed.
- Folding Unit FD-503
- Finisher FS-612
- Multi Punch GP-501
This section describes indications on the screen to inform you that the disposal of punch waste is due, and
also instructions on how to dispose it.
6.5.1 Emptying Scrap Box of Folding Unit FD-503
When the scrap box of Folding Unit FD-503 becomes full, the following message will appear in the message
area of the screen.
[Scrap of punch unit is full / Please empty scrap box]
The Punch-Hole Scraps Box indicator lights in red in the Consumable and Scrap Indicators area of the Ma-
chine Screen.
Follow the procedure below to empty the scrap box.
1
Display the help message on the Machine Screen, then press [Consumable/Scrap].
2
Press [Punch Scrap]in the help message area.