Konica Minolta bizhub PRESS C8000e - Manual (Page 274)

7.2 Checking Print Count 7
bizhub PRESS C8000/e 7-6
7.2 Checking Print Count
The Utility Menu Screen allows you to view the current indication of the following counters as a list:
- Total counter
- Full color counter
- Single color counter
- Black counter
- Printer total counter
The product life cycle of the drum, developer, transfer belt, charging corona, toner filter, developing unit, and
2nd fusing unit can also be checked. This information can be printed, if desired.
With Perfect Binder PB-503 installed, the machine also displays [Perfect Bind Counter] on the Utility Menu
Screen to provide the following information on perfect bound books:
- Total book volumes (classified by trimming width)
- Total bodies
- Total thickness
d
Reference
The machine can be set to display [CMS Part Count List] on the Utility Menu Screen which allows you to dis-
play or edit the CMS part count list (part name, P/N, limit), and also to reset the count. For details, please
contact your service representative.
%
Pressing [System Information] displays the system information of the machine. Press [Close] to restore
the previous screen.
%
For the developer counter and the OPC drum counter, you can set cycle and running time. Contact your
service representative, if desired.
1
Press Utility/Counter on the control panel.
The Utility Menu Screen will be displayed.
2
Check the counter information.
The counter information is displayed in the left side area of the screen.