Konica Minolta bizhub PRESS C8000e User Manual
Page 357
bizhub PRESS C8000/e
9-39
9.6
[03 Finisher Adjustment] (Large Capacity Stacker LS-505)
9
9.6
[03 Finisher Adjustment] (Large Capacity Stacker LS-505)
9.6.1
[05 Stacker Adjustment] - [01 Paper Width Adjustment]
Adjust the position of adjustment plates if output sheets show misalignment in crosswise direction on the
stacker tray of Large Capacity Stacker LS-505.
Objects of adjustment: Stacker No. 1, Stacker No. 2
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [05 Stacker Adjustment], and [01 Paper Width Adjustment] in sequence.
The Paper Width Adjustment Screen will be displayed.
3
If two units of Large Capacity Stacker LS-505 are connected, select either [Stacker No. 1] or [Stacker
No. 2].
4
Press [Print Mode].
5
Load the desired paper size into a tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.