Konica Minolta bizhub PRESS C8000e - Manual (Page 371)

bizhub PRESS C8000/e 9-53
9.8 [03 Finisher Adjustment] (Perfect Binder PB-503) 9
11
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -128 (Short) to +127 (Long) (1 step = 0.1 mm)
12
Repeat the steps from 6 to 11 until the desired result is obtained.
13
Press [Return] to restore the Perfect Binder Adjustment Menu Screen.
9.8.2 [07 Perfect Binder Adjustment] - [02 Cover Lead Edge Adj.]
Adjust the lead edge position of left cover page determined with reference to the body set using Perfect
Binder PB-503. The sizes referred to in this section are those of body sets corresponding to cover sizes.
Objects of adjustment: Full Area, A4 v, B5 v, A5 w/v, 8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom (220-379 mm),
Custom (148-219 mm)
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [07 Perfect Binder Adjustment], and [02 Cover Lead Edge Adj.] in se-
quence.
The Cover Lead Edge Adjustment Screen will be displayed.
3
Load cover sheets in either cover tray of perfect binder or any other tray.
4
Load paper for body sets in the desired tray.
5
Select either [PB Tray] or [Except PB Tray].
6
Select the size to be adjusted using [+] and [,] to scroll.
7
Press [Print Mode].
8
Select the tray key loaded with paper for body sets.
9
Press Start on the control panel. A sample pattern of perfect-bound book will be output.