Konica Minolta bizhub PRESS C8000e - Manual (Page 378)

9.8 [03 Finisher Adjustment] (Perfect Binder PB-503) 9
bizhub PRESS C8000/e 9-60
2
Press [03 Finisher Adjustment], [07 Perfect Binder Adjustment], and [07 Sub Compile CD Width Adj.] in
sequence.
The Sub Compile CD Width Adjustment Screen will be displayed.
3
Load cover sheets in either cover tray of perfect binder or any other tray.
4
Load paper for body sets in the desired tray.
5
Select the size to be adjusted using [+] and [,] to scroll.
6
Press [Print Mode].
7
Select the tray key loaded with paper for body sets.
8
Press Start on the control panel. A sample pattern of perfect-bound book will be output.
9
Check that the horizontal scanning direction is equal on every page of the body set.
10
If it is not equal on all pages, proceed to the next step.
If unequalness appears on the latter half of body pages while the former half shows equalness, use [07
Perfect Binder Adjustment] - [08 Clamp CD Width Adjustment].
If any adjustment is required, press [Exit Print Mode] to return to the Sub Compile CD Width Adjustment
Screen.
11
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -20 (Wide) to +20 (Narrow) (1 step = 0.1 mm)
% If desired, display the help message to view details of the adjustment you made.
12
Repeat the steps from 6 to 11 until the desired result is obtained.
13
Press [Return] to restore the Perfect Binder Adjustment Menu Screen.
9.8.8 [07 Perfect Binder Adjustment] - [08 Clamp CD Width Adjustment]
Change the adjustment width in crosswise direction if output sheets show misalignment in a body set using
Perfect Binder PB-503. The sizes referred to in this section are those of body sets corresponding to cover
sizes.
Objects of adjustment: Full Area, A4 v, B5 v, A5 w/v, 8.5 e 11 v, 5.5 e 8.5 w, 16K v, Custom (220-379 mm),
Custom (148-219 mm)
NOTICE
Use this adjustment if body pages are misaligned in horizontal scanning direction or on the latter half of body
pages, when making more than one perfect-bound book. If misalignment appears on the former half of body
pages, use [07 Perfect Binder Adjustment] - [07 Sub Compile CD Width Adjustment].
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].