Konica Minolta bizhub PRESS C8000e - Manual (Page 379)

bizhub PRESS C8000/e 9-61
9.8 [03 Finisher Adjustment] (Perfect Binder PB-503) 9
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [07 Perfect Binder Adjustment], and [08 Clamp CD Width Adjustment]
in sequence.
The Clamp CD Width Adjustment Screen will be displayed.
3
Load cover sheets in either cover tray of perfect binder or any other tray.
4
Load paper for body sets in the desired tray.
5
Select the size to be adjusted using [+] and [,] to scroll.
6
Press [Print Mode].
7
Select the tray key loaded with paper for body sets.
8
Press Start on the control panel. A sample pattern of perfect-bound book will be output.
9
Check that the horizontal scanning direction is equal on every page of the body set.
If unequalness appears on the latter half of body pages while the former half seems to be equal, pro-
ceed to the next step.
If it is not equal on all pages, use [07 Perfect Binder Adjustment] - [07 Sub Compile CD Width Adjust-
ment].
10
If any adjustment is required, press [Exit Print Mode] to return to the Clamp CD Width Adjustment
Screen.
11
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -20 (Wide) to +20 (Narrow) (1 step = 0.1 mm)
% If desired, display the help message to view details of the adjustment you made.
12
Repeat the steps from 6 to 11 until the desired result is obtained.
13
Press [Return] to restore the Perfect Binder Adjustment Menu Screen.
9.8.9 [07 Perfect Binder Adjustment] - [09 Cover Up/Down CD Width Adj.]
Change the adjustment width in matching body sets and covers in order to adjust their positions in crosswise
direction using Perfect Binder PB-503.
Objects of adjustment: Perfect Binder Tray, Except PB Tray