Konica Minolta bizhub PRESS C8000e - Manual (Page 409)

bizhub PRESS C8000/e 9-91
9.12 [05 Color Density Control] 9
4
Select the screen type.
% Press [Quality Adj.] to display the Quality Adjustment Screen.
% Press [)] on the right side of [Screen] to display the desired screen type. Or, press [Screen] to dis-
play the Screen Setting Screen, then select the desired screen type. Press [OK] on the Screen Set-
ting Screen, if displayed.
% Press [Close] on the Quality Adjustment Screen.
5
Select the tray to output the charts.
% Press [Output Setting] to display the Output Setting Screen.
% Select the desired output tray key, then press [OK].
6
Display the Change Individual Set Screen.
% Press [Paper Setting] on the Print Mode Screen to display the Paper Setting Screen, then press
[Change Set] to display the Change Individual Set Screen.
7
Select an output paper type.
% Press [Paper Type] to select the desired paper type.
8
Select colorimetric data to be the base of the adjustment.
% Press [Color Density].
% Select [Default Adj. Data] to use the data provided as factory default.
% To use custom colorimetric data, press [Paper Category] to display the Paper Category Screen, then
select the desired paper category. When completed, press [OK].
9
Return to the Print Mode Screen.
% Press [OK] on the Change Individual Set Screen to return to the Paper Setting Screen.
% Press [Close] on the Paper Setting Screen to return to the Print Mode Screen.
10
Press Start on the control panel.
The charts required for the adjustment will be output to the tray selected in step 5.
11
Press [Exit Print Mode]. The Color Density Manual Control Screen will be restored.
12
Press [Return] to restore the Color Density Control Menu Screen.
9.12.3 [03 Register Paper Category]
As the colorimetric data to be the base of gamma correction, the machine can be provided with the default
data and custom data. The default data is provided as factory default. The custom data is to be measured
with the desired paper and screen types.
The custom colorimetric data should be precomposed using the Spectrophotometer i1iSis XL or i1Pro and
registered into the machine.
Creating the custom colorimetric data
This section describes how to create the custom colorimetric data.
- Output charts to create the custom colorimetric data. The number of output sheets varies depending
on the paper size.
Group Details Output sheet
count
Large sizes Paper sizes of 271.0 mm or more in width (Y) 3 sheets
Medium sizes Paper sizes of 210 mm to 270.9 mm in width (Y) 4 sheets
Small sizes Paper sizes of 176 mm to 209.9 mm in width (Y) 6 sheets
Irregular siz-
es Paper sizes of 175.9 mm or less in width (Y), or 168 mm or less in
length (X) Not corrected
as being exempt