Konica Minolta bizhub PRESS C8000e - Manual (Page 459)

bizhub PRESS C8000/e 10-45
10.2 [01 User Setting] - [01 System Setting] 10
10.2.4 [03 Paper Tray Setting] - [02 Auto Tray Selection Setting]
When the tray currently used for printing becomes out of paper, the machine automatically feeds the same
paper size from another tray to continue the output job (Auto Tray Switch: ATS).
Follow the procedure below to select the trays to take over the feeding when ATS functions, and to determine
the priority of the selected trays.
1
Follow the procedure on page 10-3 to display the User Setting Menu Screen.
2
Press [01 System Setting], [03 Paper Tray Setting], and [02 Auto Tray Selection Setting] in sequence.
3
Select the trays to take over the feeding when ATS functions, from the keys provided under "ATS/APS
Switch" on the left side of the screen.
% The trays selected here will be detected automatically when ATS functions.
4
Specify the priority of selected trays using the keys provided under "Tray Priority" on the right side of
the screen.
% Select the tray to change the order of priority, then use "Up [+]" or "Down [,]" to change it.
5
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Paper Tray Setting Menu Screen will be
restored.
10.2.5 [03 Paper Tray Setting] - [03 Type for Auto Paper]
Specify paper conditions for trays to be selected when Auto Paper or ATS functions.
The machine indicates "Paper Differ" if paper conditions specified here are not set to the tray automatically
selected by Auto Paper or ATS.