Konica Minolta bizhub PRESS C8000e - Manual (Page 462)

10.2 [01 User Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-48
10.2.8 [04 Reset Setting] - [01 Auto Reset Setting]
Auto Reset is a function that automatically restores the screen specified as default, when a certain period of
time has elapsed without any key pressed on the touch panel or control panel.
Use this setting to specify the period of time to elapse before Auto Reset is activated.
1
Follow the procedure on page 10-3 to display the User Setting Menu Screen.
2
Press [01 System Setting], [04 Reset Setting], and [01 Auto Reset Setting] in sequence.
3
Select the desired time.
% Selecting [OFF] will deactivate the Auto Reset function.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Reset Setting Menu Screen will be re-
stored.
10.2.9 [05 Default Screen Setting]
Select the screen to be initially displayed (default) when the sub power switch is turned on.
Setting item Default screen
[MACHINE] The Machine Screen will be displayed.
[JOB LIST/Hold Job] The Job List/Hold Job Screen will be displayed.
[JOB LIST/Reserved Job] The Job List/Reserved Job Screen will be displayed.