Konica Minolta bizhub PRESS C8000e - Manual (Page 483)

bizhub PRESS C8000/e 10-69
10.7 [02 Administrator Setting] - [01 System Setting] 10
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04/05 Expert Adjustment], [01 Printer Adjustment], and [04 CD-Mag. Ad-
justment] in sequence.
The CD-Mag. Adjustment Screen will be displayed.
% Please refer to page 9-15 for details of subsequent operations.
10.7.13 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [06 Registration Loop
Adj.]
Adjust the paper loop amount in registration roller section. This adjustment is required when output paper
shows skew or wrinkles, or paper misfeed occurs in registration roller section.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.
Object of adjustment: Tray 1 Large Size to Tray 9 Large Size, Tray 1 Small Size to Tray 9 Small Size, ADU
Large Size, ADU Small Size, ADU Plain/W Under 150 mm, ADU Thick/W Under 150 mm, Thick
Adjustable range: -99 (smaller) to +99 (larger) (1 step = 0.1 mm)
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04/05 Expert Adjustment], [01 Printer Adjustment], and [06 Registration
Loop Adj.] in sequence.
The Registration Loop Adjustment Screen will be displayed.
3
Press the key of the item to be adjusted.
4
Press [Print Mode].
The Print Mode Screen will be displayed.
5
Select A3 w for the tray to be adjusted, then press Start on the control panel.
A sample pattern will be output.
6
Check the sample pattern.
7
If any adjustment is required, press [Exit Print Mode] to return to the Registration Loop Adjustment
Screen.
8
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
9
Repeat the steps from 4 to 8 until the desired result is obtained.