Konica Minolta bizhub PRESS C8000e - Manual (Page 484)

10.7 [02 Administrator Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-70
10
Press [Return] to restore the Printer Adjustment Menu Screen.
10.7.14 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [07 Pre-registration
Adj.]
Adjust the paper loop amount in pre-registration roller section of the trays. This adjustment is required when
output paper shows skew or wrinkles, or paper misfeed occurs in registration roller section.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.
Objects of adjustment: Tray 1, Tray 2, Tray 3, ADU Large Size, ADU Small Size
Adjustable range: -99 (smaller) to +99 (larger) (1 step = 0.1 mm)
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04/05 Expert Adjustment], [01 Printer Adjustment], and [07 Pre-registration
Adj.] in sequence.
The Pre-registration Adjustment Screen will be displayed.
3
Press the key of the item to be adjusted.
4
Press [Print Mode].
The Print Mode Screen will be displayed.
5
Select A3 w for the tray to be adjusted, then press Start on the control panel.
A sample pattern will be output.
6
Check the sample pattern.
7
If any adjustment is required, press [Exit Print Mode] to return to the Pre-registration Adjustment
Screen.
8
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
9
Repeat the steps from 4 to 8 until the desired result is obtained.
10
Press [Return] to restore the Printer Adjustment Menu Screen.