Konica Minolta bizhub PRESS C8000e User Manual
Page 492
10.7
[02 Administrator Setting] - [01 System Setting]
10
bizhub PRESS C8000/e
10-78
% When the appropriate patch is located in the lower left area of the central patch [5]: Adjust M and Y
to the negative direction.
11
Press [Print Mode].
The Print Mode Screen will be displayed.
12
Select A4 w, then press Start on the control panel.
A test chart will be output.
13
Press [Exit Print Mode] to return to the Printer Gamma Offset Adjustment Screen.
14
Repeat the steps from 9 to 12 until the desired result is obtained.
15
Press [Return] to restore the Printer Adjustment Menu Screen.
10.7.23
[04/05 Expert Adjustment] - [04 Quality Adjustment] - [02 Stabilization Adj.
Setting]
Specify the frequency of Maximum and Medium Density Corrections to stabilize the image quality.
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.