Konica Minolta bizhub PRESS C8000e - Manual (Page 527)

bizhub PRESS C8000/e 10-113
10.10 [02 Administrator Setting] - [04 Network Setting] 10
10.10 [02 Administrator Setting] - [04 Network Setting]
10.10.1 [01 Machine NIC Setting]
Configure the NIC settings such as the IP address or line speed of the machine.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [04 Network Setting] and [01 Machine NIC Setting] in sequence.
The Machine NIC Setting Screen will be displayed.
3
Make a setting for each item.
% Use the touch panel keypad or control panel keypad to enter numeric values. Press [Set] to high-
light the next area for entry.
% To specify the mail server by the host name, enter the IP address of either DNS Server 1 or DNS
Server 2. When using two DNS servers, enter the IP address of both.
NOTICE
To activate this setting change of the DNS server, the main body needs to be rebooted. Press [OK], and
turn off then on the sub power switch.
% Specify the line speed of the network in Line Speed Setting. Choose from the options provided.
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Network Setting Menu Screen will be re-
stored.