Konica Minolta bizhub PRESS C8000e - Manual (Page 545)

bizhub PRESS C8000/e 10-131
10.14 [03 Touch Panel Adjustment] 10
10.14 [03 Touch Panel Adjustment]
Use this function to check that the keys displayed on the screen and the touch sensor are properly aligned,
if the machine does not respond to the press on the touch panel properly.
NOTICE
The Touch Panel Adjustment Screen can be accessed also by pressing Utility/Counter on the control panel
and [4] from the control panel keypad in sequence. The machine can be set to delete this setting from the
Utility menu, but to display the Touch Panel Adjustment Screen only when [4] is pressed from the control
panel keypad. Contact your service representative, if desired.
1
Press Utility/Counter on the control panel.
The Utility Menu Screen will be displayed.
2
Press [03 Touch Panel Adjustment].
The Touch Panel Adjustment Screen will be displayed.
3
Press the "+" symbol at the upper right corner, then lower left corner on the screen.
The present coordinates will be displayed in the message area of the screen.