Konica Minolta bizhub PRESS C8000e - Manual (Page 573)

bizhub PRESS C8000/e 11-27
11.4 [Controller] - [03 System Setting] 11
11.4.2 [02 Default Machine Setting]
Reset all the settings of the machine to the factory default (initial status).
1
Follow the procedure on page 11-3 to display the Controller Administrator Setting Screen.
2
Press [03 System Setting] and [02 Default Machine Setting] in sequence.
3
Press [Start].
NOTICE
Pressing [Start] resets all the machine settings to the factory default. Please be especially careful with
the use of this key.
4
Press [Close].
The System Setting Screen will be restored.