Setting the encryption strength, Setting the mode using ssl – Konica Minolta bizhub PRESS C8000e User Manual
Page 598
12.5
[Security] Tab
12
bizhub PRESS C8000/e
12-24
Setting the encryption strength
Set the encryption strength of the installed SSL certificate.
1
Click the radio button of "Set an Encryption Strength" on the SSL/TLS Setting page, then click [OK].
2
Select the desired encryption strength from the drop-down list.
3
Click [OK]. Click [Cancel] to cancel the setting and clear the specified information.
4
Click [OK] on the setting complete page. The SSL/TLS Information page will be displayed.
Setting the mode using SSL
Set the mode using SSL for the installed SSL certificate.
1
Click the radio button of "Set Mode using SSL" on the SSL/TLS Setting page, then click [OK].
2
Select the mode to use SSL/TLS from the drop-down list.
3
Click [OK]. Click [Cancel] to cancel the setting and clear the specified information.
4
Click [OK] on the setting complete page. The SSL/TLS Information page will be displayed.