Communicating with devices on a dh+ link, Using this chapter, Selecting devices that you can connect – Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers User Manual
Page 133: Apter 9, Chapter
Advertising
![background image](/manuals/52988/133/background.png)
1
Publication 1785-UM012D-EN-P - July 2005
Chapter
9
Communicating with Devices on a DH+ Link
Using This Chapter
Selecting Devices That
You Can Connect
You can use a DH+ link for data transfer to other PLC-5 controllers or higher
level computers and as a link for programming multiple PLC-5 controllers. A
PLC-5 controller can communicate over a DH+ link with other controllers
and with a personal computer. You can connect a maximum of 64 stations to a
single DH+ link.
For Information About
Go to Page
Selecting devices that you can connect
Link design
Configuring the channel for DH+ communication 9-3
Using the global status flag file
Monitoring DH+ communication channels
Estimating DH+ link performance
Application guidelines
Advertising