Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers - Manual (Page 348)

Publication 1785-UM012D-EN-P - July 2005
E-10 Switch Setting Reference
(1771-ALX) Configuration Plug
Configuration Plug
17341
Do not place a jumper
on this set of pins.
1. Lay the module on its right side.
The configuration plugs are visible on the lower
rear of the module.
2. Set the configuration plug as shown below
according to your application.
If You are Using But Not Set Configuration Plug
32-point I/O modules and
any address method 1771-IX or 1771-IY on the 2 lower pins
1771-IX and 1771-IY
modules and any
addressing method 32-point I/O modules on the 2 upper pins