Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers - Manual (Page 213)

1 Publication 1785-UM012D-EN-P - July 2005
Chapter
12
Protecting Your Programs
Using This Chapter
Read this chapter for an overview of:
• defining privilege classes
• assigning a privilege class to a channel or offline file
• assigning a privilege class to a node
• assigning read/write privileges to a program file
• assigning read/write privileges to a data file
For detailed information about configuring privileges, see the documentation
for your programming software.
If your application requires privileges beyond those provided by the enhanced
or Ethernet PLC-5 controllers, see the PLC-5 Protected Controller Product
Data for 1785-5/26, -5/46, and -5/86 controllers, publication 1785-2.28.
For Information About Go to Page
Passwords and privileges 12-2
Defining privilege classes 12-3
Assigning a privilege class to a channel or offline
file 12-4
Assigning a privilege class to a node 12-4
Assigning read/write privileges to a program file 12-5
Assigning read/write privileges to a data file 12-5
Using protected controllers 12-6
IMPORTANT
To use these options, select the full passwords and
privileges feature when you install the software.