Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers - Manual (Page 301)

1 Publication 1785-UM012D-EN-P - July 2005
Appendix
D
Instruction Set Quick Reference
Using This Chapter
If You Want to Read About Go to Page
Relay instructions D-2
Timer instructions D-3
Counter instructions D-4
Compare instructions D-5
Compute instructions D-7
Logical instructions D-14
Conversion instructions D-15
Bit modify and move instructions D-16
File instructions D-17
Diagnostic instructions D-19
Shift register instructions D-20
Sequencer instructions D-21
Program control instructions D-22
Process control and message instructions D-25
Block Transfer instructions D-25
ASCII instructions D-27
Timing and memory requirements for bit and word
instructions D-30
Timing and memory requirements for file program control, and
ASCII instructions D-38
IMPORTANT
For a more detailed description of each of these
instructions, see the PLC-5 Programming Software
Instruction Set Reference, publication 1785-6.1.