Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers User Manual
Page 184
Advertising
Publication 1785-UM012D-EN-P - July 2005
11-10 Communicating with Devices on an Ethernet Network
In most cases, you can leave the broadcast address at the default setting.
Configure this Field
By Doing the Following
Broadcast Address
Cursor to the field, and enter an address of the following
form:
a.b.c.dWhere: a, b, c, d are between 0-255 (decimal)
If you change the default and need to reset it, type 0.0.0.0.
Advertising