Rockwell Automation 1785-Lxxx Enhanced and Ethernet PLC-5 Programmable Controllers - Manual (Page 202)

Publication 1785-UM012D-EN-P - July 2005
11-28 Communicating with Devices on an Ethernet Network
10. Select the
User Provided Page #4
to display the following
screen:
11. Click on [
+]A22
to display the following screen:
You can change the radix display of N7:0 through N7:2:
1. Go back to the Custom Data Table Monitor page.
2. In the Address column, click on
N:7
0 to display the radix
selection page:
3. Click on a radio button to select the desired radix type.