Buhler 2425 User Manual
Page 118
SECTION 2 - OPERATION
2-60
The
second
function
of
the
tractor
accumulated hours position is to display a
whole number value (to the tenth digit)
reflecting the total number of hours
accumulated on the tractor up to 1999.9. This
allows the user to keep track of tractor usage
accumulated
during
different
tractor
operations. This will appear on the lower half
of the display along with the hourglass symbol
after the total tractor hours display
disappears. At any time, the operator can
press the acknowledge/reset button and zero
the display to begin recounting hours for a
specific function. This will not affect total
tractor accumulated hours. Unless the
operator does it manually, the display will
automatically revert back to zero after it has
reached 1999.9 hours.
Figure 2-91