Buhler 2425 User Manual
Page 221
Advertising
SECTION 2 - OPERATION
2-162
The rear weight kit, 1, has thirty-three 30 kg
(67-lb.), suitcase-style weights and, along with
its
brackets
and
hardware,
weighs
approximately 1100 kg (2,400 lbs.).
NOTE: The rear weight kit cannot be installed
on units that have a PTO option or a 3-point
hitch option. The 3-point hitch or PTO is now
considered part of the rear axle ballast, and
the remaining additional weight required can
be installed as liquid weight in the tires.
Figure 2-222
1
Rear weights can be removed by loosening the
nut, 1, on the left side of the tie rod, 2, and pulling
the tie rod fully to the right against the right tire.
Figure 2-223
1
2
Remove the two, capscrews, 1, from the
underside of the weight package.
Figure 2-224
1
1
Advertising