Buhler 2425 - Manual (Page 373)

5-43
DEALER COPY
FIRST 50-HOUR SERVICE
CHECK AND ADJUST, AS REQUIRED
DESCRIPTION OK DESCRIPTION OK
STATIONARY CHECKS -- ENGINE OFF:
Check engine coolant level. Lubricate the lower articulation pin.
Check engine fan belt tension. Lubricate the front steering cylinder.
Check engine water pump belt tension
Lubricate the rear steering cylinder pin.
Check engine water pump belt tension
(2360 and 2425 only).
Lubricate the upper articulation pin.
Check air conditioner compressor belt tension. Lubricate the front drag link pin.
Check alternator drive belt tension. Lubricate the rear drag link pin.
Check the air cleaner connections. Lubricate the rear axle drive shaft steady bearing.
Change the fuel Filter(s). Lubricate rear axle drive shaft articulation slip yoke.
Change the engine oil.
Lubricate the PTO articulation drive shaft slip yoke
Change the engine oil filter.
Lubricate the PTO articulation drive shaft slip yoke
(option).
Change the engine coolant system filter. Lubricate the PTO drive shaft rear slip yoke (option).
Check the level of DCA4 coolant additive. Lubricate the input driveline slip yoke.
Check the battery connections at the starter. Lubricate the front output driveline slip yoke.
Check the radiator, heater hoses and connections. Lubricate the transmission input cross and bearing
(2290 2335 2360* 2375* only)
Clean the engine air cleaner outer element.
(2290, 2335, 2360*, 2375* only).
*When equipped with standard axles option.
Check brake reservoir level. Lubricate the rear axle cross and bearing (2290,
2335 2360* 2375* only)
Adjust the brakes.
2335, 2360*, 2375* only).
*When equipped with standard axles option.
Check tire air pressure according to ballast on axle. Lubricate the rear axle articulation cross and
bearing (2290 2335 2360* 2375* only)
Clean the cab outer air filter.
bearing (2290, 2335, 2360*, 2375* only).
*When equipped with standard axles option.
Check the air conditioner sight glass. Lubricate the transmission rear output cross and
bearing (2290 2335 2360* 2375* only)
Check the battery connections at the battery.
bearing (2290, 2335, 2360*, 2375* only).
*When equipped with standard axles option.
Check the battery electrolyte level. Lubricate the front output cross and bearing (2290,
2335 2360* 2375 *only)
Check the windshield washer fluid level.
2335, 2360*, 2375 *only).
*When equipped with standard axles option.
Check the seat for proper operation. Lubricate the front axle cross and bearing (2290,
2335 2360* 2375* only)
Change the planetary hub oil.
2335, 2360*, 2375* only).
*When equipped with standard axles option.
Change the differential oil. Check all wheel hardware torque.
Check the transmission oil level. Check all optional weight kit hardware torque.
Change the transmission filter.
Change the hydraulic oil. Check the axle mounting bolt torque.
Change the hydraulic filter.
Lubricate the 3-point hitch (option). Check cab mount hardware torque.