Buhler 2425 User Manual
Page 138
Advertising
SECTION 2 - OPERATION
2-80
The Operator cannot cancel or interrupt the
derate sequence from occurring on the engine.
The module does not recognize activation of,
nor is it tied into the EICS acknowledge/reset
button on the dash of the tractor.
If the tractor is shut down and then restarted, and
the alarm condition still exists on the tractor (low
engine coolant level), the EICS and module will
repeat the alarm and derate sequence. If the
tractor is restarted and the alarm condition has
been corrected, the tractor will return to normal
operation. If the tractor is not shut down, and the
alarm condition is corrected, the tractor will
return to normal operation without having to shut
it off and restart it.
Advertising