INFICON STC-2002 Thin Film Deposition Controller Operating Manual - Manual (Page 133)

p STC-2002 DEPOSITION CONTROLLER y
SECTION 3.XX e page 131 of 276 ^
Communications setup includes:
COM/IO lock code
KEYBOARD BEEP
RS232 Baud rate
RS232 Protocol
To view / program one of these...
Screen Key[s] to press
Run Time fixed MENU
MAIN MENU EXECUTIVE MENU
EXECUTIVE MENU COMM. SETUP
COMMUNICATIONS SETUP MENU arrow[s] ; EDT (edit)
( Lock Code, if enabled [see Comm Setup] numeric entry + ENT (enter) )
COMMUNICATIONS SETUP EDIT MENU arrow[s] ; CHG (change)
COMMUNICATIONS SETUP EDIT/CHG
MENU numeric entry[s] + ENT (enter)
System Configuration includes:
LCD Contrast
/ Bias
Password Lock #
(Process) Run Number
Recorder Function
Recorder Out Ch a n ne l
Real Clock Time
Real Clock Date
Need S ource /S ensor Card 1
Need S ource /S ensor Card 2
Need S ource /S ensor Card 3
Need S ource /S ensor Card 4
I/O Slot 1 Type
I/O Slot 2 Type
I/O Slot 3 Type
I/O Slot 4 Type
Memory Module IFC
To view / program one of these...
Screen Key[s] to press
Run Time fixed MENU
MAIN MENU EXECUTIVE MENU
EXECUTIVE MENU SYSTEM CONFIG
System Configuration menu arrow[s] + EDT (edit)
( Lock Code, if enabled [see Sys Config] numeric entry + ENT (enter) )
System Configuration Edit menu arrow[s] + CHG (change)
System Configuration Edit/Change menu numeric entry + ENT (enter)