Select procedure options – MTS Series 793 Application User Manual

Page 176

Advertising
background image

MTS MultiPurpose TestWare®

Select Procedure Options

Creating a Practice Test Procedure

176

Select Procedure Options

You can use the MPT Options Editor to set MPT preferences. The settings are
saved with the procedure.

For our test, we need to specify the following application preferences:

•

The counter display on the MPT control panel

•

The hydraulic state required to run tests

•

The file format for data files generated by the MPT application

•

A description of the procedure

1. On the MPT toolbar, select the Options Editor icon.

2. Specify how the you want the counters to appear on the MPT control panel.

A. Click the Control Panel tab.

B. In the Counters box, click Sequence Counters and Channel

Counters.

C. In the Display Format box, click Cycles.

3. Specify the Hydraulic State required to run the test.

A. Click the Execution tab.

B. In the Required Power list, select Off.

Note

Since this program is for simulated testing, click Off. This way, you can
only run the test when hydraulic pressure is disabled.

4. Set the file format for MPT data files.

Click the Specimen tab. Complete the tab as follows:

•

Data File Mode: Append

•

Data File Format: Excel

•

Data File Time Stamp: Time

•

Specimen Log: Append

•

Clear Counters on Reset (enabled)

5. Type a description of the procedure.

A. Click the Properties tab.

Advertising
This manual is related to the following products: