MTS Series 793 Application - Manual (Page 102)

MTS MultiPurpose TestWare®
About Group Process Interrupts
Working with MPT Processes 102
In this case, when the Group is interrupted, the following things happen:
• The Cyclic process ends immediately.
• The Segment process runs normally.
• When the Segment process is done, the Group process ends.
User-Defined
Interrupt to a
Group Process
When the Group
process is
interrupted, the
Cyclic process
ends immediately,
but the Segment
process runs
normally.
Segment
Interrupt
Done Start
Group
Process
Trigger
Cyclic