MTS Series 793 Application User Manual

Page 538

Advertising
background image

MTS MultiPurpose TestWare®

Profile Editor Controls and Displays

Model 793.11 Profile Editor

538

Count Units

Assigns Cycles or Segments as the cyclic units. One cycle equals two segments.

Cycles

The first cycle in a row begins at the current level, travels to level 1, then travels back
to level 2. Subsequent whole cycles in the row travel from level 2 to level 1 and back
to level 2. If a row has a cycle count of 0.5, the cycle begins at the current level and
travels to level 1.

•

Rows with whole cycle counts always end at level 2.

•

Rows with half cycle counts (0.5, 3.5, and so forth) always end at level 1.

Segments

The first segment in a row begins at the current level and travels to Level 1.
Subsequent segments in the row travel from one level to the next.

•

Rows with even segment counts always end at level 2.

•

Rows with odd segment counts always end at level 1.

Channel Setup Window (part 3 of 4)

I

TEM

D

ESCRIPTION

Cycle Example

Row 0

Row 1

0.5

1

2

Advertising
This manual is related to the following products: