MTS Series 793 Application - Manual (Page 207)

Profile Process
MTS MultiPurpose TestWare® Command Processes 207
General tab
For more information For information on creating profiles with the Profile Editor application, see
Chapter 18, “Model 793.11 Profile Editor” .
See “How to Use the Manual Command Feature” on page 209.
General Tab
I TEM D ESCRIPTION
Name Specifies the process name displayed on the Procedure or Group process
window.
Process Enabled Enables the process. (Clear this box to disable the process.)
Execute Process Specifies the number of times the process will be run.
Counter Type Enables a process counter.
Options are None, Transient, or Fixed. Transient counters are displayed only
when the process is active. Fixed counters are displayed throughout the test.
Counter Label Names the counter.
When you run the test, this name appears under Sequence Counters on the
MPT control panel.
Note If this box is blank, the process name is used as the counter label.