MTS Series 793 Application User Manual
Page 419
Operator Information Process
MTS MultiPurpose TestWare®
Other Process Descriptions
419
5. If available, click the Parameters tab and define parameters as desired.
6. Click the Destination tab.
7. Type a description of the data file in the Data Header box.
8. In the Destination list, click the destination for the acquired data. (If you
click User-specified data file, type a file name in the User Data File box.)
9. Click the General tab.
10. In the Name box, type a name for this process. (You can also name the
process in the Procedure table.)
11. Select the Process Enabled check box. (If this box is cleared, the process
will not run.)
12. In the Execute Process box, type number of times you want the process to
run.
13. Optional—In the Counter Type list, click a counter type.
14. Optional—If you enabled a counter, type a Counter Label.
15. Set the desired Start and Interrupt signals for the process in the Group or
Procedure table.
For more information
For information about creating variables with the Variable Editor, see:
•
“How to Create, Edit, Assign, and Unassign Variables with the Right-Click
Method”
•