MTS Series 793 Application - Manual (Page 60)

MTS MultiPurpose TestWare®
About the MPT Specimen Log
Performing Common Tasks 60
For more information
See “About Counters” on page 49.
For information about filtering MPT Specimen Log entries, see “MPT Options
Editor Specimen Tab” on page 73.
Scroll to new entry Disables or enables the MPT Specimen Log scrolling function. This
function allows the message log to automatically shift (scroll) to display
new entries as they occur.
Note By default, the Scroll to new entry box is enabled.
If you select Scroll to new entry, new log entries appear at the bottom of
the log as they occur. The log scrolls down automatically to ensure that the
latest entry is displayed.
If you clear the Scroll to new entry, the application adds new log entries
to the bottom of the log as they occur, but the log does not automatically
scroll down to the latest entry. New entries may not be visible unless you
manually scroll to the bottom of the log. With this selection you can
review the contents of the log without the window ‘jumping’ to the bottom
of the display each time a new log entry arrives.
Message Logs Window (part 3 of 3)
I TEM D ESCRIPTION