Example of sequencing multiple processes, Example of sequencing multiple processes 97 – MTS Series 793 Application User Manual
Page 97
Example of Sequencing Multiple Processes
MTS MultiPurpose TestWare®
Working with MPT Processes
97
Example of Sequencing Multiple Processes
The window below contains three processes. The diagram that follows illustrates
the signals selected and available for each process.
Interrupt
<Procedure>.Start
<Procedure>.Interrupt
Kathy’s Ramp.Done
Kathy’s DAQ.Done
none
<Procedure>.Start
<Procedure>.Interrupt
Kathy’s Fatigue.Done
Kathy’s DAQ.Done
Start
Interrupt
Kathy’s Ramp
<Procedure>.Start
<Procedure>.Interrupt
Kathy’s DAQ.Done
Kathy’s Fatigue.Done
Start
Kathy’s Fatigue.Done
Kathy’s Ramp.Done
<Procedure>.Start
<Procedure>.Interrupt
Interrupt
Start
Kathy’s Ramp.Done
<Procedure>.Start
<Procedure>.Interrupt
Kathy’s Fatigue.Done
Kathy’s DAQ
Window with Three Processes
Signals received by and sent from processes
Kathy’s Fatigue
none
Kathy’s Ramp.Done
<Procedure>.Start
<Procedure>.Interrupt
Kathy’s DAQ.Done
Note
To simplify this illustration, some of the
signals normally available in this
scenario are not shown.