MTS Series 793 Application - Manual (Page 39)

MPT Procedure Editor
MTS MultiPurpose TestWare® About MultiPurpose TestWare 39
For more information
See “Process Palette” on page 84.
See “About the MPT Options Editor” on page 62.
See “MPT Specimen Editor” on page 131.
Displays the MPT Specimen Log for the current MPT specimen.
Edit mode
Execute mode
Changes between edit and execute test modes. To change (toggle between)
modes, click the edit /execute mode button.
You must be in edit mode to create or make changes to your procedure.
Note You cannot switch to edit mode if the procedure is running or holding.
You must be in execute mode to run your test. The procedure automatically
switches to execute mode if you click Run on the Station Controls panel.
Note When you change to execute mode, MPT takes control of the various
resources used in the procedure, such as control channels, digital
output channels, and so on. You cannot use these resources with
Station Manager until you unlock the procedure and attain the edit
mode.
Trash can. Processes are not stored in the trash can as they are in the Windows
Recycling Bin. They are deleted immediately after you drag them to the trash
can icon.
MPT Procedure Editor Toolbar (part 2 of 2)
I TEM D ESCRIPTION