MTS Series 793 Application - Manual (Page 111)

About Variables and the Operator Information
MTS MultiPurpose TestWare® Working with MPT Variables 111
You use the Variable Editor to associate
parameters to variables. In this example,
the frequency parameter is associated to
a variable whose initial value is set to
10Hz.
You set the variable value to be editable
in the Variable tab of the Operator
Information process window (not
shown).
Each time the Operator Information
process is triggered (three times in this
example), it displays a run-time window
that allows the operator to edit the initial
value set in the Variables Editor.
If the operator entered 1, 5, and 2 in
each successive run-time window, it
would result in a scope trace that looks
like this.