MTS Series 793 Application - Manual (Page 520)

MTS MultiPurpose TestWare®
How to Play Out Profiles
Model 793.11 Profile Editor 520
About Setting Up Profiles in MPT
MPT Profile Command
process
The Profile Command process is an MPT command process that controls
actuator movement. The Profile Command process generates commands based
on the contents of an imported file, such as profiles created by the Profile Editor
application (though you can create profiles with other applications, such as a text
editor or a spreadsheet application).
When you open the MPT application, a blank procedure table will appear when
you select the Procedure Editor. You then drag and drop the process you wish to
include for the test. You can start multiple processes nearly simultaneously by
selecting the same Start signal for each of the processes.
The Profile Command process icon is located on the MPT Process Types palette
in the Command section. You drag and drop a copy of the icon onto the test
procedure table, and it will become part of that test procedure. When you double-
click the Profile Command process icon on the procedure table, the Profile
Command Parameters window will open. You then import the desired profile into
the test procedure.
Once all the parameters have been selected for the procedure, save the file, and
then run the procedure using Station Control panel. For more information about
the MPT application and the Profile Command process see the MPT section of
this manual.