MTS Series 793 Application - Manual (Page 236)

MTS MultiPurpose TestWare®
Profile with ALC Process
Command Processes 236
Actions tab
File summary tab
Action Tab
I TEM D ESCRIPTION
Name Displays the name of the action in the profile.
Action Displays the action, as defined by the Station Manager’s Event-Action editor,
to be triggered when the associated action name (for example, <Start> and
<Stop>) is encountered by the profile.
File Summary Tab
I TEM D ESCRIPTION
Profile Channel Displays all available profile channels.
Units Displays the unit of measurement for the end level dimension.
Maximum Displays the maximum value for the channel.
Note This may be zero if the profile was not created using the MTS Profile
Editor application.
Minimum Displays the minimum value for the channel.
Note This may be zero if the profile was not created using the MTS Profile
Editor application.
Station Channels Displays the station control channels where the profile will be played out.
Note This box is blank if you have not mapped the profile channel to a
station channel on the Mapping tab.