MTS Series 793 Application - Manual (Page 316)

MTS MultiPurpose TestWare®
Cyclic Acquisition Process
Data Acquisition Process Descriptions 316
For more information
See “About Buffers” on page 272.
See “About Station Signals” on page 276.
Counter Type Enables a process counter.
Options are None, Transient, or Fixed. Transient counters are displayed only
when the process is active. Fixed counters are displayed throughout the test.
Counter Label Names the counter.
When you run the test, this name appears under Sequence Counters on the
MPT control panel.
Note If this box is blank, the process name is used as the counter label.
General Tab
I TEM D ESCRIPTION