MTS Series 793 Application - Manual (Page 527)

Profile Editor Controls and Displays
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 527
Level1 (L1)
Level2 (L2)
For the first segment in a row, level 1 specifies the first target of the actuator.
Subsequent segments travel from one level to the next.
Rows with even segment counts always end at level 2.
Rows with odd segment counts always end at level 1.
For the first cycle in a row, level 1 specifies the midpoint of the cycle, and the
actuator continues to level 2 to complete the cycle. Subsequent (whole) cycles
travel from level 2 to level 1 and back to level 2. (True Sine waveforms
continue on to the mean level.)
If a row has a cycle count of 0.5, the cycle begins at the current level and
travels to level 1. Rows with whole cycle counts always end at level 2. Rows
with half cycle counts (0.5, 3.5, and so forth) always end at level 1.
Action (Optional) Select from actions or counters previously specified in the Actions window.
Actions are triggered after the corresponding row in the profile has played out.
Counters, displayed on the MPT control panel while the process is running, are
incremented after a corresponding row in the profile has played out.
Channel Grid (part 2 of 3)
I TEM D ESCRIPTION