MTS Series 793 Application - Manual (Page 477)

Profile Editor
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 477
Note The Profile Editor’s graphical display will not display the tapered
waveforms. To view tapered wave shapes, use the Scope in the Station
Manager application.
Note how the Channel 2 plot stretches to achieve the desired phase relationships
between each row of channel data. For instance, the Phase Lag of Row 2 of
Channel 1 is 0 degrees, while the Phase Lag for the same row on Channel 2 is
180 degrees.
This means that for Row 2, the channel data of Channel 2 lags Channel 1 by
180 degrees, as noted in the figure.
If desired, you could view the Channel 1 and Channel 2 plots on separate axes
by selecting the Multiple Plot option on the Graphical Preview tab of the
Options Editor.
Sample Block-Arbitrary Profile
The Graphical Preview
shows the 180 degree
phase shift specified in
Row 2.