MTS Series 793 Application - Manual (Page 173)

Set Process Parameters in the Group Table
MTS MultiPurpose TestWare® Creating a Practice Test Procedure 173
3. Define the Digital Output (Switch Fan On) process.
A. In the group table, click the Digital Output (Switch Fan On) process
icon.
B. Click the Outputs tab and move the Fan Switch resource to the
Included list.
C. Click the Output Table tab. In our sample test scenario, the cooling
fan power supply is controlled by a microswitch. This microswitch
applies 110 V to the fan when it is set high, and removes 110 V from
the fan when it is set low (or cleared). So for this process, the
appropriate setting is Set, which means set high.
D. Use the default settings on the Settings and the General tab.
Digital Output
(Switch Fan On)