MTS Series 793 Application - Manual (Page 479)

Profile Editor
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 479
A single profile can (and often does) contain the command content of an entire
procedure.
Sample Profile Grid
Profile output example
This example is based on the Sample Profile Grid.
• Row 0 specifies a ramp waveform shape, 3 segments, 3 seconds per
segment, Level 1 of -10 mm, and Level 2 of 7 mm.
• Row 1 specifies a ramp waveform shape, 3 segments, 4 seconds per
segment, Level 1 of 3 mm, and Level 2 of 6 mm.
• Row 2 specifies a ramp waveform shape, 3 segments, 5 seconds per
segment, Level 1 of 4 mm, and Level 2 of -8 mm.
With the Profile Editor application you can create and edit files that contain
specifications for custom and/or arbitrary waveforms. These files are called
profiles.
This chapter describes the basic concepts and key features of the MTS Profile
Editor application. It also describes how the Profile Editor application is used
with the other MTS software applications.