MTS Series 793 Application - Manual (Page 455)

Data Display Process
MTS MultiPurpose TestWare® Other Process Descriptions 455
32. In the Name box, type a name for this process. (You can also name the
process in the procedure table.)
33. Select the Process Enabled check box. (If this box is cleared, the process
will not run.)
34. In the Execute Process box, type number of times you want the process to
run.
35. Optional—In the Counter Type list, click a counter type.
36. Optional—If you enabled a counter, type a Counter Label.
37. Set the desired Start and Interrupt signals for the process in the group or
procedure table.
Defining additional
chart properties
1. Right-click on the plot. The Chart Properties window will appear.
2. Click the Axis tab.
3. Select the desired Axis you wish to format.
4. Check the desired Auto formatting boxes and type corresponding values for
each.
5. Click Save Defaults if you want to save these settings as default settings.
6. Click the desired colors and font selections on the General tab.
Important The Graph Area Color and the Background Color must be
different colors. Your text will not appear if they are the same color.