MTS Series 793 Application - Manual (Page 389)

Digital Output Process
MTS MultiPurpose TestWare® External Control Process Descriptions 389
Keep in mind When you are configuring a Digital Output process for use in your procedure,
keep in mind:
• You must allocate a digital output resource in the station configuration file
that can be controlled by the Digital Output process. For more information,
see the MTS 793 Control Software manual (PN 100-147-130).
• You should choose an output signal option that is compatible with the
external device connected.
• Outputs assigned for a Digital Output process cannot be manually triggered
from Station Manager while MPT is in the execute mode.
• When the Digital Output process ends, the state of the external device will
remain in the current state until a new station is opened or until another
Digital Output process changes that state.
Note Use the Pulse option if you want to return the output to its initial state
when the process is done.