MTS Series 793 Application - Manual (Page 168)

MTS MultiPurpose TestWare®
Set Process Parameters in the Procedure Table
Creating a Practice Test Procedure 168
3. Define the second Segment Command process (Return to Zero).
A. In the procedure table, click the Segment Command (Return to Zero)
process icon.
B. In the Segment Command parameters pane, click the Channels tab.
Move all the channels you want to generate the command on to the
Included list. Move all the others to the Available list.
C. Click the Command tab. Type and select the parameters needed for the
test, as follows:
• Segment Shape: Ramp, for a Time of 2 Seconds
• Channel: 10kN Actuator
• Control Mode: Force
• Absolute End Level: 0.0 N
D. Click the General tab and observe the default selections.
Segment Command
(Return to Zero)