MTS Series 793 Application - Manual (Page 554)

MTS MultiPurpose TestWare®
How to Use Multiple Default Templates
Default Templates 554
7. From the MPT file icon pull-down menu, click Save Procedure to save the
customized default template. This new customized template will be used
when creating any new procedures.
8. Close the file.
9. From the MPT file icon pull-down menu, click Open Procedure.
10. In the Open Procedure window, right-click the default.000 file, and then
click Properties.
11. In the Properties window, select the Read Only check box, and then click
OK. This protects the new custom template from being inadvertently
changed.
How to Use Multiple Default Templates
You may create multiple unique default templates for your testing needs.
However, each template must be named default.000, and must be stored in a
separate directory—you cannot save more than one default.000 file in a given
directory.
1. Open your current default template (default.000).
2. Modify the default template as desired.
3. From the MPT file icon pull-down menu, click Save Procedure As.
4. Use the Save Procedure As window to save the file to a different directory,
with the label default.000. (All default templates must be named
default.000.)
Template Error Messages
MPT displays various error messages if it cannot locate a default template file.
The built-in template
If MPT cannot locate the default template, it will display a default error message,
and create a procedure based on its built-in template.
The built-in template uses factory-set preferences that cannot be changed.
If the default template has been deleted, you can create a new procedure with the
desired attributes and save it as “Default.000.”