MTS Series 793 Application - Manual (Page 79)

MPT Options Editor Control Panel Tab
MTS MultiPurpose TestWare® MPT Options Editor 79
MPT Options Editor Control Panel Tab
Use the Control Panel tab to specify what information is displayed on the MPT
control panel.
Access
From the MPT control panel or MPT Procedure Editor window, the access path
is:
> Control Panel tab
Or, from the MPT Procedure Editor window, an alternate path is:
Tools > Options Editor > Control Panel tab
Control Panel Tab (part 1 of 2)
I TEM D ESCRIPTION
Test Progress Enables and disables the Run Time portion of the Test Progress panel on the
MPT control panel. You can also change the Run Time panel display format.
Run Time—Enables/disables the Run Time display. If Run Time is disabled,
the Run Time display does not appear on the Test Progress panel
Display Format—Changes the Run Time display format. The format options
are HH:MM:SS (hours:minutes:seconds) and cumulative time units.
Specimen Enables and disables the Procedure Name and Procedure State portion of the
Specimen panel.
If the Procedure Name or Procedure State is disabled, the respective display
does not appear on the Test Progress panel.
Procedure Name—Displays the name of the current procedure.
Procedure State—Displays the current procedure state.